What’s the value for gps bike tracker?

With bike theft on the rise worldwide, more riders and fleet operators are turning to a bike tracker as a reliable solution for security, tracking, and management. Whether you own a motorcycle, electric bike, or a fleet of delivery bikes, a GPS bike tracker provides real-time location data, theft alerts, and peace of mind.

Key Features of a Bike Tracker

Real-Time GPS Tracking:

Track your bike’s location anytime, anywhere by phone app or website

2. VariousAlerts

Instant notifications are sent when external power disconnection,Low battery,overspeed,Harsh deceleration,Impact,Fatigue driving is detected.

Geo-Fence Protection

Set a virtual boundary and receive alerts if the bike enters or leaves a defined area.

4. Waterproof & Hidden Design

Bike trackers are usually IP66 waterproof and small enough to be hidden under the dashboard or seat,A/B pillar.

Playback & History Records

Review historical routes, stop points, and mileage for better management and analysis.

How to activate the bike tracker:

Insert the SIM card or connect to external power supply, VT120-L will start up and run automatically.

Introduction for set the tracker input work mode:

Command format: 250,input,mode,time

input: the serial number of the input port, 1=input1, 2=input2, 3=input3, 4=input4, 5=input5, 6=input6, and so on;
mode: input port working mode, 0=low level trigger, 1=high level trigger, 2=AD analog input;
time: The trigger time of the input port. The trigger event will be generated when the trigger time exceeds the set value. It is only valid for the high and low level trigger input modes, the unit is ms, the value is [0, 65535], when time =0 It is triggered immediately and the default is 0.

Note:

IN1 is fixed to low level trigger and cannot be set.

IN2 is fixed as high level trigger and cannot be set.

The input modes for different models is different.

After send the command to tracker, it will reply the below:

250,

result: the result of Command Reply;

OK-The command is set successfully;

Unsupport -the command is not supported;

Failed-The command format or password is incorrect and the setting failed.

We are glad to introduce our VT120-L Gps Bike Tracker

The tacker is designed with 1 inputs（can be used for ACC and door detect,also fuel monitor）,1 Outputs to stop engine remotely(can also connect to speed limiter or buzzer), 1 Micro USB. It meet customer’s basic requirement.

Our GPS tracking system comes tested, activated and ready to use! All you have to do is open login and monitor your vehicles. IStartek is committed to matching your business with the correct solution, so that you can improve your services, increase revenue and reduce costs. If you have questions regarding which of our gps tracker and monitor systems , we are always at your service