Why choose iStartek PT60 GPS tracker with battery?

Hello everyone, this is Allen from iStartek, we are a quality factory for 2g 3g 4G GPS Tracker in China, this article we will explain to you why to choose iStartek PT60 GPS tracker with battery.

PT60 is a 4G wireless installation-free GPS locator, specially designed for pan-IoT applications, including vehicle tracking, asset tracking, and unattended application scenarios tracking. It has a built-in high-sensitivity GPS and 4G communication antenna, which support fast positioning.

Now we will show you what features are supported by the PT60 GPS tracker:

• PT60 GPS tracker has built-in strong magnetic, when installing we just need to be attached the magnetic side to metal, it will be installed tightly.
• PT60 GPS tracker has a built-in 7800mah battery, if only send 1 location data within 24 hours, it can be used for around 8 months. And the battery is rechargeable, it’s not one-time use.
• PT60 trailer GPS tracker support different 3G 4G bands, can meet different countries’ band’s demands.

A different version of PT60	Supported Bands
PT60 EC200SCN CAT1	FDD:B1/B3/B5/B8 TDD:B34/B38/B39/B40/B41 GSM:B3/B8
PT60 EC200SEU CAT1	FDD:B1/B3/B5/B7/B8/B20/B 28 TDD:B38/B40/B41 GSM:B2/B3/B5/B8
PT60 EC200TAU CAT4	FDD:B1/B2/B3/B4/B5/B27/B 8/B28/B66 TDD:B40 WCDMA:B1/B2/B4/B5/B8 GSM:/B2/B3/B5/B8
PT60 EC25AF CAT4	FDD:B2/B4/B5/B12/B13/B1 4/B66/B71 WCDMA:B2/B4/B5

• PT60 GPS tracker support 4 Types of different working modes that can meet your different demands.

Smart Working mode: PT60 GPS tracker with battery enters intelligent working mode according to user-defined “wake-up time “,” vibration interval wake-up time”, and “static interval wake-up time ” such as Smart working mode, hourly working mode, real-time tracking working mode, Interval Wake-up Mode.

Hourly working mode: PT60 GPS tracker with battery according to the user-defined specific time node, to activate the work, the time node can set up a maximum of 24.

Real-time working mode: GPS tracker uploads data at user-defined intervals, and the device does not actively enter a dormant state. For this mode, only when the device battery is below 3.3 V will it go dormant.

Interval Wake-up Mode: PT60 GPS tracker enters the working and dormant state according to the user-defined working time and sleep time. In this mode of sleep, sleep is not activated according to movement or vibration.

• PT60 GPS tracker has a built-in light sensor, so if someone removes it there will be a tamper alarm.
• PT60 GPS tracker has low battery alarm, when you receive low battery alarm you can charge the device.
• PT60 GPS tracker supports FOTA, so we can upgrade device firmware easily even if it’s installed on vehicles already.

 

If you are interested in our PT60 GPS tracker with battery, why not contact us to get samples for testing?