Dedicated to Provision of Long Term Stable Running IoT Devices

RELATED

Contact Us

    PRODUCT

    VT110 2G Car GPS Tracking Device

    Car GPS Tracking Device

    Product Description:

    VT110 is a 2G GPS vehicle tracker, built-in high-precision GPS positioning module reports the positioning information and vehicle status to the vehicle tracking service platform through the 2G network for real-time monitoring, anti-theft and dispatch management. It can be applied to fleet management, public transport management, school bus management, taxi operation management, vehicle insurance company management, lease management and private car anti-theft etc.

    Detail:

    Product Function

    • GPS+GSM base station dual-mode positioning
    • Real-time tracking
    • Track by time interval
    • Track by distance
    • Heading change report
    • Mileage report
    • External power disconnectionalarm
    • SMS alarm
    • Low battery alarm
    • Engine and door status change alarm
    • Support dual servers
    • Geo-fence alarm
    • Speeding alarm
    • GPS signal loss alarm
    • Harsh acceleration alarm
    • Harsh deceleration alarm
    • Harsh turning alarm
    • Impact alarm
    • Vibration (towing) alarm
    • Idling alarm
    • Fatigue driving alarm
    • 16Mb Flash
    • FOTAupgrade
    • ACC ON、ACC OFF set time interval upload
    • Remote fuel/electricitycut off
    • Buzzer alarm (optional)

    Specification:

    Item Specification
    Size 90 x 33.8 x 16.6mm
    Input voltage DC 9 – 90V/1.5A
    Weight About 54g
    Waterproof grade IP66
    Inbuilt Battery 120mAh
    Battery operating time 30min
    Frequency Band VT110-2G:(M25MA-04-STD)

    GSM: 850/900/1800/1900MHz

    LED Indicator Blue indicator*1, green indicator*1, built-in, transparent external visible
    GPS module BDS/GPS/GLONASS/QZSS
    GSM antenna Built-in FPC
    GPS antenna built-in ceramic antenna(25 * 25 * 4mm)
    Flash Memory 16M bit
    Sensor 3D acceleration sensor
    Switch External toggle switch
    SIM Card Nano SIM card
    Input/Output 1 Digital input (Can be configured as positive/negative trigger by Parameter Editor). Defaults to positive trigger for ACC detection.

    1 Output

    1 Micro USB

     

    Technical Support: Magic Lamp